Panel and home runs in a basement under construction, a job by Electrician Residential Toronto

Electrical Wiring & Rewiring in Toronto

Whole-home rewiring and partial rewires for older Toronto houses with aging wiring.

Wiring is hidden behind your walls, but it is the backbone of your home's electrical system. Many Toronto homes — especially those built before 1960 — still carry knob-and-tube or older rubber-insulated wiring that has exceeded its useful life. Rewiring is a larger project, but it is the single biggest safety upgrade you can make to an older house.

Knob-and-Tube and Aluminum Wiring

Knob-and-tube wiring, common in Toronto homes built before 1950, has no ground conductor and insulation that has often become brittle. Aluminum branch wiring, used in the 1960s and 70s, is safe if properly maintained but can develop loose connections at devices over time. Both are flagged by insurers and home inspectors. We replace them with modern copper NM cable that includes a ground.

Partial vs Whole-Home Rewires

A full rewire replaces every branch circuit in the house and is usually done during a major renovation when walls are open. A partial rewire targets the highest-risk circuits — for example, knob-and-tube in the attic or aluminum wiring at device boxes. We help you decide based on your home's condition, your budget, and your plans.

What to Expect During a Rewire

A whole-home rewire is a multi-day project. We open walls where needed (and discuss repair scope with your contractor), pull new cable, install new boxes and devices, and bring grounding up to code. The work is ESA-permitted and inspected. We keep dust and disruption as contained as possible and coordinate with any other trades on site.

Reasons you might need this service

  • Your home has knob-and-tube or aluminum branch wiring
  • An insurer has asked for a wiring upgrade
  • You are doing a major renovation and walls are open
  • Two-prong outlets throughout the house indicate ungrounded wiring
  • Lights dim across multiple rooms when appliances run
Panel and home runs in a basement under construction, a job by Electrician Residential Toronto

Electrical Wiring & Rewiring — frequently asked questions

Do you have to open all my walls?

A full rewire usually requires opening some walls, but we plan the cuts strategically and discuss repair with you in advance. During a renovation with walls already open, access is much easier.

How long does a whole-home rewire take?

A typical Toronto semi or detached home takes roughly 5–8 working days depending on size and access. We give you a specific schedule with your quote.

Get in touch

Talk to Toronto residential electricians today

Call us with your project or repair and we will walk you through the options and next steps.

Call